Translation of "low byte" to German language:
Examples (External sources, not reviewed)
Byte | Byte |
byte | Byte |
byte position | Byte Position |
byte 16 | Byte 16 |
1 Byte | LSBFirst |
Byte Order | Protokoll Revision |
Byte Order | Byte Reihenfolge |
Byte Swap | Byte Reihenfolge |
0 Byte | 0 Byte |
Byte Array | Byte FeldThe byte array was new created. |
unsigned byte | 8 Bit ohne VorzeichenData type |
Byte Table | Byte Tabelle |
x NUL byte | x NUL Byte |
byte 0 3 | Byte 0 3 |
byte 4 7 | Byte 4 7 |
byte 8 11 | Byte 8 11 |
byte 12 15 | Byte 12 15 |
Swap Byte Order | Bytefolge umkehren |
Image Byte Order | Einheit |
Image Byte Order | Byte Reihenfolge des Bildes |
KDE byte editor | KDE Binärdaten Editor |
Use 2336 byte sectors | Sektoren mit 2336 Byte verwenden |
Byte number on tape | Anzahl der Bytes auf dem Band |
X Back up one byte | X Sichern eines Bytes |
Creates a new byte array. | Legt ein neues Byte Feld an. |
Values ... encoded as byte values. | Werte ... kodiert als Bytewerte. |
Print the current byte array. | Druckt das aktuelle Byte Feld. |
Close the current byte array. | Schließt das aktuelle Byte Feld. |
Select the entire byte array. | Wählt das gesamte Byte Feld aus. |
Updates the byte frequency statistics. | C Feld ...destination of the byte array |
Updates the byte frequency statistics. | Aus Datei geladen.name of the encoding target |
Save byte array to a file. | Speichert das Byte Feld in eine Datei. |
Assume a 2336 byte sector mode | 2336 Byte Sektoren unterstellen |
Use 2336 byte sectors for output | 2336 Byte Sektoren für Ausgabe benutzen |
use byte offsets instead of character offsets | Byteoffsets statt Zeichenoffsets verwenden |
Bookmark a location within the byte array. | Fügt ein Lesezeichen innerhalb eines Byte Feldes ein. |
Unable to send a 0 byte file. | Eine 0 Byte große Datei kann nicht gesendet werden. |
minimum size of shared memory, normally 1 byte | Tabelle 1. |
amazing reverb by kokkinizita more bang per byte | Unglaubliche Neuauflage von kokkinizita mehr Pep pro Byte |
Use 2336 byte sector mode for image file | 2336 Byte Sektoren für die Abbilddatei verwenden |
Swap the byte order of the input data | Byte Reihenfolge der Eingabedaten vertauschen |
The byte order used to decode the values. | Wählen Sie die Operation für den Filter aus. |
Bytes in the range 0x00 to 0x7f that are not part of a double byte character are assumed to be single byte characters. | Inoffiziell werden die Bytes, bei denen das oberste Bit nicht gesetzt ist (0x00 bis 0x7F) als ASCII Zeichen interpretiert. |
Sets the default byte mode for all select queries. | Setzt den Standard Byte Modus für alle SELECT Abfragen. |
Warning byte array has been modified since last update. | Auf Höhe einpassen |
Related searches : Byte By Byte - Byte Length - Byte Size - Byte Count - High Byte - Byte Order - Byte Array - Byte Erase - Byte Stream - Single Byte - Length Byte - Byte Offset - Raw Byte